Email: askgordon@provenenergy.com, your question will be answered and Gordon will include your question for all future visitors!
We would be delighted to hear from you if you are interested in becoming part of our channel. If you think you’ve got what it takes click on the link on the right hand side 'become a turbine seller' . Ideal candidates will have an existing business with the core skills we require and could be ideally based anywhere in the world!
We would be delighted to hear from you if you are interested in becoming part of our channel. If you think you’ve got what it takes click on the link on the right hand side 'become a turbine seller' . Ideal candidates will have an existing business with the core skills we require and could be ideally based anywhere in the world!
A reseller holds a supply of Proven Energy turbines in stock and can supply and arrange installation for you at relatively short notice, an installer will carry out installation of turbines but does not keep stock.
The turbines don't affect animals at all, we have turbines on livestock and poultry farms, in wildlife parks, nature reserves as well as in equestrian centres.
There are no low frequency noise issues with our turbines.
There is no link between our turbines and epilepsy. Our turbines don't create a high enough frequency to trigger an epileptic seizure.
No, the turbines keep operating in high winds due to their unique design. The original patented blade design means in high winds the blades cone out of the wind. This reduces the surface area exposed to the wind and stops the turbine from over producing; as the speed of the blades pick up, they twist and change angle. This twisting allows the blades to stall the speed enough to prevent an over speed of the turbine. Once the wind decreases, the blades open back out and return to an angle that doesn’t stall. This means that even in the strongest winds the turbines will continue to produce the maximum power without stopping.
If your turbine is battery connected, power is stored in the battery which you can use when there is no wind. If your turbine is grid connected and you sell excess power to the grid, when there is no wind, your power will come from the grid.
In extremely high winds the turbines keep operating due to their unique design. The original patented blade design means in high winds the blades cone out of the wind. This reduces the surface area exposed to the wind and stops the turbine from over producing; as the speed of the blades pick up, they twist and change angle. This twisting allows the blades to stall the speed enough to prevent an over speed of the turbine. Once the wind decreases, the blades open back out and return to an angle that doesn’t stall. This means that even in the strongest winds the turbines will continue to produce the maximum power without stopping.
No, our turbines don't use a gearbox, the blades rotate at a relatively slow rpm and the blade aerodynamics all contribute to ensure the turbines are quiet in operation.
Bird strikes do happen very rarely. We take care to site turbines away from bird feeders and nests as well as to identify migratory flight-paths where appropriate. The turbines rotate at a slow rpm and our black blades can be detected by birds from several hundred meters – allowing them to adjust their course appropriately. Vehicles, building windows and natural predators kill millions more birds a year than are killed or injured by wind turbines.
No, there is no interference whatsoever with electrical equipment.
No, turbines do not. We have a number of turbines at telecoms bases for a variety of leading telecoms companies including O2, Orange and T-mobile.
No they do not produce radiation.
No they do not produce electromagnetic fields or affect any equipment in the vicinity.
No, it could add value to your property if you generate your own energy supply and your neighbour’s property prices should not be affected.
A grid-connected system feeds power directly into your main distribution board and exports power if there is too much back to the grid; you can also take power from the grid. This is a balanced and synchronous system and will not affect your day-to-day living. Regulations state if there is a power cut the turbine must stop generating for safety.
A battery charging system provides you with a continuous power source for your house via an inverter, which makes the power from the turbine usable. If you have an off grid site, you would have a diesel generator on stand-by to cover periods when you had no wind at all for a few days (typically because the batteries are sized to give you around 2-3 days worth of storage). If there is too much power from the turbine, it can be diverted into either water or space heating.
A direct heating system feeds power directly into a series of small heaters (either water or space heaters) and is used in conjunction with your existing heating system. It is the cheapest of our systems but also the most dedicated as you only get power for heat – and you only get that heat when there is wind. Heat can be stored in water or storage heaters and released at times of calm.
G-83/1 and G-59/1 are the electrical recommendations that apply in the UK, these regulations vary globally. Why not fill out the form on the right hand side named 'buy a wind turbine' if you are interested and find out more.
A grid-connected turbine will have to disconnect for safety reasons if there is a power cut. This is a legal requirement. If you have regular power cuts and need to keep running then a grid connect battery system will provide power even during power cuts.
In the UK , G-83/1 and G-59/1 are engineering recommendations for the grid connection of an electrical generator to the low voltage network. If a turbine is under 16A per Phase then G-83/1 applies. If it is over 16A per Phase then G-59/1 applies. G- 83/1 is more a notification of connection to the grid whereas G-59/1 seeks permission to connect. This IS a legal requirement, which all small-scale and large-scale generators have to adhere to.
Paybacks will depend on several factors. The main ones being your wind resource, what you pay or get paid for your electricity and if you get any sort of grants for the project. 10-years or so might be achievable or even exceeded. Often in remote areas a wind turbine is the lowest cost option for continuous electricity supply and payback will be instant!
Possibly! Please refer to our website for further details and links to current grants.
The UK domestic grants are very straightforward. EU, business and community grants can involve a bit more and sometimes may be better completed by a professional for a fee.
Payment for exporting electricity to the grid will vary depending on the country of your intended location, to find out more about the situation in your local market why not click on 'buy a wind turbine' on the right or contact your nearest reseller or installer - you can find them by clicking on 'Proven global' on the right hand side of the screen.
These apply in the UK only but other counties may have something similar. ROC’s are Renewable Obligations Certificates and are a green certificate that you sell to electricity companies. At the end of the year electricity companies can offset the amount of toxins they have produced with these certificates. This betters the environment and ensures electricity companies are not penalised for not meeting their targets. To find out more about your local market, why not click on 'buy a wind turbine' on the left or check with your local reseller by finding them in 'global cover' on the left.
It depends on what you’re generating and what you’re consuming. If you consume most of what you use as you have a high base load then there probably isn’t much point. If you could potentially export quite a lot then it may be worth spending the additional money on the meter – please see our export metering datasheet. In the UK it is possible to export but in other countries you should check with your electricity supplier if it is possible. To find out more about your local market, why not click on 'buy a wind turbine' on the left or check with your local reseller by finding them in 'global cover' on the left.
VAT rates vary, however the following can be read as a rough guide: 17.5% - Applicable to UK businesses, EU businesses without EU VAT number and 5% - Domestic Householders (you will require a signed certificate) Zero rated (0%) – all non EU exports and UK new builds.
Turbines can be mounted as close as 20 to 50 meters to your home or workplace or as far away as 450 to 500 meters depending on the turbine and the cable we use. The further away the turbine is the bigger the cable required will be.
Following an assessment by a structural engineer to check suitability of roof structure, Proven Energy turbines can be roof mounted on buildings with flat roofs. The loads would be greater than that suited to an average small domestic property.
There are two main ways of calculating your wind resource, one is to use web based means - the links to which can be found in 'Why Wind' in the 'Our Products' area of this website. The other is to install a small anemometer on your site for at least 6 months to a year. We recommend suitable sites have wind speed in excess of 5 meters per second and above with good exposure to the prevailing winds and good site access. Web based measurements of wind speed comes with a significant degree of inaccuracy.
We would recommend a desk or site based assessment of your site or sites. This will let you know if your site is suitable for wind turbines. When assessing a site, due care and attention should be given to high obstacles such as trees, buildings and hills which can block the wind flow and significantly reduce the available wind speed.
Outputs vary from site to site; site assessment will be needed to work this out. The estimations you receive from this are for indicative purposes only.
Each turbine and tilt-up tower combination requires its own “footprint” on the ground. As a rough guide taking the tower height and multiplying it by 2.5 will give you an approximate clearance space. The width required is the rotor diameter +2m to allow enough space to raise and lower the turbine. Guyed towers might require more space. To discuss your requirements why not complete the enquiry form on our website and someone will call you back to discuss, click on 'buy a wind turbine'.
If you have a big garden with good exposure then you will have a good chance of having a suitable site. Our turbines are generally not suitable for domestic roof installations. To discuss your requirements why not complete the enquiry form on our website and someone will call you back to discuss, click on 'buy a wind turbine'.
The towers can be painted any colour that you wish. The turbine heads can also be painted but we prefer to keep them black where possible as through time the paint can flake and chip on the plastic covers. The 6kW and 15kW turbines are supplied in black or white.
Yes, you can click on the right hand side of our website and find the turbine nearest to you, contact us, your local reseller or installer to arrange a visit to a nearby location.
Click on the link on the right named 'global cover' and enjoy flying round the world to find your nearest reseller or installer, to find out even more why not contact us.
You can build your own tower but we do not recommend this, as we are unable to guarantee it. We can provide you with all the loadings of the turbine but it would be up to you to calculate and design a suitable tower. A tower mount would be required in this case to fit our turbine on any tower. This tower mount can be either a straight pipe or flanged.
If you are hands on we encourage you to do your own foundation work or arrange a builder to do it for you. We will provide you with all the instructions and the steelwork required to do this.
If you install the turbine yourself you will void yourself from the SCHRI and Clear Skies grant schemes. In most cases installation costs less than the grant so it makes no sense to install it yourself.
We have turbines in hurricane and typhoon areas - one on top of a school in Japan which survived intact the worst typhoon in to hit Japan in 100 years; the turbine ran throughout. We also have one near the top of Ben Nevis - Scotland's highest mountain, and on Triglav - Slovenia's highest mountain. There is a Proven 6 on top of the Greenland ice shelf and several powering the Belgian research station in Antarctica. A Proven 6 is powering telecoms in the Saudi Arabian desert - where solar panels got too hot to work! Have a look at our turbine finder to see if you can spot them.
2.5kW, 6kW and 15kW
A Proven 2.5kW is available on an 11m mast, a Proven 6kw is available on a 15m mast and the Proven 15kw is available on a 15m mast, alternatives are available but we recommend you talk this through with your installer.
The turbines are all made of the same materials with only a few small exceptions. The blades on the 2.5kW turbines are polypropylene whereas the 6kW and 15kW blades are thermoplastic glass composite. Other than that the towers are all galvanised steel and the covers are polypropylene or hardened polypropylene. The blades of the 2.5kW will soon be made from thermoplastic glass composite to standardise the product range. One huge advantage of Proven Blade materials is that they are almost entirely erosion proof - so they survive in sandstorms and hailstorms where others have disintegrated!
The turbines are downwind so that our flexible blades can fold down in severe storms, while still running and producing, without hitting the tower. This design is the result of extensive research and testing over many years, and has the advantage of nullifying the destructive bending stresses in normal wind turbine blades.
Proven wind turbines are very unusual in that they can operate in turbulent sites that would destroy other turbine designs, this is because of our flexible self governing blade system. In a turbulent site some power loss is inevitable - so choosing a Proven Energy turbine will ensure power loss is minimised.
Surviving storms is hard work for a wind turbine, many other designs are destroyed by stormy weather. From our beginnings in 1980 Proven Energy have strived to make wind turbines that will survive no matter what the weather and Scotland has been a great base for bad weather testing! The Proven Energy design is the result of inspiration, invention, severe testing and over twenty sever years of development. Your investment in clean renewable energy should be enduring, an investment made not just for you, but for our children too.
We offer a 2-year standard warranty and can extend it to up to 5-years cover upon request.
It doesn’t matter if the site is 1-Ph or 3-Ph as we will split the output over three Phases instead of one if it is 3-Ph. This is easy to do and incurs no extra costs.
Every turbine is checked before leaving Proven Energy. We are working towards ISO9001 and IEC61400-2 (the new international standard for small-scale wind turbines), which will help to further ensure the quality of our turbines.
Yes, alternative tower heights can be sourced.
Planning permission is required in the UK but planning regulations vary globally. A planning pack is available from the 'our products' section of the website, but we recommend you 'take the tour' to find out more about, planning and installation. To find out more about your local market, why not click on 'buy a wind turbine' on the left or check with your local reseller by finding them in 'global cover' on the left.
A planner’s decision can be appealed if you follow the appeal process as per the instructions on your application form.
Unlike larger-scale wind which has a complete set of guidelines, small-scale wind doesn’t have anything so comprehensive. In the UK there - PPG / PPS 22 apply in England and Wales to help encourage planners to approve small-scale renewable projects, this does help a planning application through. Scotland has nothing formal yet but like England , Wales and Northern Ireland , most planners are supportive.
The turbine has a design life of 25-years.
Wind power is a resource that’s more readily available. As an example, a well sited 2.5kW turbine will run your typical 3-bed house whereas you’d need around 56 125W solar PV panels to do the same job. The panels alone would be around two to three times the cost of a fully installed 2.5kW wind turbine. You then have to add delivery and installation as well as all the control equipment on to the PV panel costs.
Our turbines have an operational temperature of down to –40degreesC and a special build turbine for cold temperatures can even go to –60degreesC! The highest operational temperature for the standard turbine is 45 degrees C. Have a look at some of the case studies contained in our site to view the extremely diverse conditions that Proven Energy turbines operate in.
Our standard turbines are all marine grade turbines with galvanised steel, stainless steel and fully encapsulated epoxy generator parts which means that they can withstand any amount of salty, turbulent sea air. We have a number of sites on the coast ranging from domestic houses to operational lighthouses as well as a number offshore on oil platforms.
The turbines require annual servicing, by an accredited installer, as part of the warranty agreement, the turbine HAS to be serviced annually.
Once a year, the turbine is lowered to ground level (using the hinged tower), the covers are removed and a full service of parts is conducted.
You can if you receive the correct training but we would encourage you to take out a service agreement.
Yes, service and maintenance plans are available and a quotation for this can be prepared for you.
“Wind gusts of up to 128mph were recorded in the vicinity of the turbine over this weekend – your technology has not missed a beat throughout.”
Find out what’s involved in planning, purchasing, installing and running your own wind turbine.
*Environmental impact and equivalent calculated using state emission factors per the EPA's eGrid database.
All figures approx.